/* Exercise 8.1 Reaction Timer */
/* Created David Miles April 2006 */
/* Updated Ben Rowland Febuary 2014 */

#include <xc.h>

// CONFIG1
#pragma config FOSC = HS        // Oscillator Selection (HS Oscillator, High-speed crystal/resonator connected between OSC1 and OSC2 pins)
#pragma config WDTE = OFF       // Watchdog Timer Enable (WDT disabled)
#pragma config PWRTE = OFF      // Power-up Timer Enable (PWRT disabled)
#pragma config MCLRE = ON       // MCLR Pin Function Select (MCLR/VPP pin function is MCLR)
#pragma config CP = OFF         // Flash Program Memory Code Protection (Program memory code protection is disabled)
#pragma config CPD = OFF        // Data Memory Code Protection (Data memory code protection is disabled)
#pragma config BOREN = ON       // Brown-out Reset Enable (Brown-out Reset enabled)
#pragma config CLKOUTEN = OFF   // Clock Out Enable (CLKOUT function is disabled. I/O or oscillator function on the CLKOUT pin)
#pragma config IESO = OFF       // Internal/External Switchover (Internal/External Switchover mode is disabled)
#pragma config FCMEN = OFF      // Fail-Safe Clock Monitor Enable (Fail-Safe Clock Monitor is disabled)

// CONFIG2
#pragma config WRT = OFF        // Flash Memory Self-Write Protection (Write protection off)
#pragma config VCAPEN = OFF     // Voltage Regulator Capacitor Enable (All VCAP pin functionality is disabled)
#pragma config PLLEN = OFF      // PLL Enable (4x PLL disabled)
#pragma config STVREN = ON      // Stack Overflow/Underflow Reset Enable (Stack Overflow or Underflow will cause a Reset)
#pragma config BORV = LO        // Brown-out Reset Voltage Selection (Brown-out Reset Voltage (Vbor), low trip point selected.)
#pragma config LVP = OFF        // Low-Voltage Programming Enable (High-voltage on MCLR/VPP must be used for programming)

#define _XTAL_FREQ 19660800	// Defines the hardware crystal frequency allowing the delay function to work correctly

#include "lcdlib.h"

const unsigned char down [5] = {'d','o','w','n',0x00};
const unsigned char up [5]   = {'u','p',' ',' ',0x00};

int main (void)
{
    ANSELA = 0x00;
    ANSELB = 0x00;
    TRISA = 0xFF;               //All inputs
    TRISB = 0x00;               //All outputs

    lcd_start();

    while (1)                   //Loop forever
    {
        lcd_cursor(0, 0);

        if (PORTA & 0x01)
        {
            lcd_print(down);
        }
        else
        {
            lcd_print(up);
        }
    }

    return 0;
}